Ferguson FK-7000 - Manual (Page 21)

11.6 List of transponders
Channels on satellites are located in "sets". Such a "set" of channels comprises a transponder.
A list of transponders is a list of frequencies available on a given satellite. In this menu you can
edit, add and remove individual frequencies. Select a satellite by pressing the left/right arrow
keys, and the desired frequency using the up/down arrow keys.
How do I search for a new channel?
In order to search for a new channel, you must know the basic channel parameter, i.e. the
frequency on which it is broadcast. This parameter may be obtained from the broadcaster, on
the internet, in the press, etc.
Next proceed to the list of transponders, select a satellite and choose the desired frequency (if it
is not on the list, use the function: add – green button on the remote control unit). Now click
OK for the selected frequency or the blue button on the remote control, in order to call out the
window for searching this frequency. Use the up/down buttons to change search options and
confirm by means of the OK button. A search will be started. Newly found channels from this
frequency will be added at the end of the list of channels.
21