Ferguson Ariva T60 - Manual (Page 18)

12 TV System
This menu is used to set the image parameters. Above all, you should determine the resolution
of the image sent over the HDMI connection. Select the highest possible resolution supported by
your HD television set in order to obtain the best image quality.
Aspect ratio
Menu- System- Aspect ratio
Resolution
Menu- System- Resolution
If you are using a SCART connection, then for the majority of
older television sets we recommend setting the video out to
CVBS. If your television supports RGB, then activate this
option in order to obtain better image quality over the SCART
connection.
Additionally, in this menu you can choose the format in which the receiver will send sound over
the digital connections. We recommend using LPCM in order to also receive a stereophonic
signal over the digital connections.
Menu- Option- Digital Audio- PCM/RAW/off
18