Ferguson TSP-800B - Manual (Page 9)

9
System Operation
1. ON/OFF
Plug the DC adapter to the AC power outlet, switch on the switch at the back of the main unit , the unit
into operating mode, press STANDBY button on the front panel or on the remote control,the unit into
standby mode.
2. INPUT MODE
Press INPUT button on top panel or on the remote control to recycle select AUX1-- AUX2
--AUX3--TUNER input mode.
3. VOLUME ADJUSTMENT
The volume is controlled by the MASTER VOLUME knob on the front panel or MASTER VOLUME button
on the remote control. You can press SUB. VOLUME +/- key on the remote to increase or decrease the
subwoofer volume level.
4. MUTE
Press the MUTE button on the front panel or on the remote control, the system goes into mute mode.
Press MUTE button again to disable the mute mode.
5. LISTENING TO RADIO
5.1 Press INPUT button to select the tuner mode.
5.2 Press the FM/AM button to select AM or FM band.
5.3 You can press the SCAN+ or SCAN- button on the remote control to automatic tuning.
5.4 You can press the TUNER + or TUNER - on the remote control to manual scan to the next station.
6. SAVE & SELECT PRESET RADIO STATIONS
There are 20 AM & 20 FM preset station in this system.
TO SAVE A PRESET STATION: Press the ”MEMORY” key, the system will enter into program mode.
Then you can press a numeric key in 0~9 to store the current frequency in preset station. If you want
program the station No. from 10~19, press the ”+10” key first, then press the numeric key in 0~9,this
will save the current frequency in station from 10~19.
TO SELECT A PRESET STATION: Press a numeric key from 0~9 to select the preset station you save
before. To select the station No. 10 to 19, press ”+10” key first, then press a key in 0~9.
7. SETTING CLOCK
Press SET button on the remote control, the number of hour display will flash, press the or until the
desired time is displayed; Press SET button again, the number of minute display will flash, press the
or until the desired time is displayed; press the SET button to confirm setting.