Ferguson Ariva T55 - Manual (Page 18)

12 TV System
This menu is used to set the image parameters. Above all, you should determine the resolution
of the image sent over the HDMI connection. Select the highest possible resolution supported by
your HD television set in order to obtain the best image quality.
Aspect ratio
Menu- System Aspect ratio
→
Resolution
Menu- System Resolution
→
If you are using a SCART connection, then for the majority of
older television sets we recommend setting the video out to
CVBS. If your television supports RGB, then activate this
option in order to obtain better image quality over the SCART
connection.
Additionally, in this menu you can choose the format in which the receiver will send sound over
the digital connections. We recommend using PCM in order to also receive a stereophonic signal
over the digital connections.
Menu- Option Digital Audio PCM/RAW, HDMI PCM/RAW, HDMI RAW/off → →
18