Ferguson Ariva HDplayer 110 - Manual (Page 11)

7
ENGLISH
Connections
Optional: Connecting a supported
USB devices
Using USB port for playback
A
Connect the supported USB device
directly to the USB port on the side panel
(as shown on the above illustration).
B
Navigate through menu in order to view
the files stored in the supported USB
device.
C
You have to stop playback before
removing the supported USB device from
the USB port.
Helpful hints:
– The USB port supports playback of all
supported multimedia files.
– Not all portable audio/video players and
digital cameras are supported.
– External hard disk drives without
separate power supply are not supported
and may not work.
– If the USB device does not fit into the USB
port, a USB extension cable is required.
Connecting DVD drive
A
Connect the supported USB DVD drive
directly to the USB port on the side panel
(as shown on the above illustration).
B
Navigate through menu in order to view
the files stored on the DVD disc.
C
You have to stop playback before
removing the USB DVD drive from the
USB port.
Helpful hints:
– The USB port supports playback of all
supported multimedia files.
– Not all USB DVD drives are supported.
– Only format ISO9660 disc are supported
– Drives without separate power supply
are not supported and may not work.
Connecting WiFi dongle
You can only connect dongles with 8187B,
8709 Realtek chip.
A
Connect the supported WiFi dongle to
the USB port on the side panel (as shown
on the above illustration).
B
Configure in menu WiFi connection.
C
You have to disconnect WiFi network
before removing the WiFi dongle from the
USB port.
Helpful hints:
– WiFi networks are usually slower than
cable (Ethernet) networks. It may affect
playback performance.