Ferguson Ariva HDplayer 200A - Manual (Page 14)

2. System Start up
2.1 AV input connection and TV
1. Connect one end of the 3 color ( white/Red/ Yellow) AV cable to the media player’s AV
output interface ,the other end to TV Set AV input . Connection Can be made by color.
2. Connect the media player to the power, set the "TV Output Settings" to PAL composite video
signal (or by remote control TV-OUT button), then transferred to the corresponding TV AV
video states for startup.
2.2 Connect With TV YPbPr component input
14