Aastra Telecom MBU 400 41-001286-00 - Manual (Page 57)

Aastra MBU 400 User Guide 57
Managing Calls
10. Press the Save softkey to save the setting, and press the Yes softkey at the save
prompt.
Creating a Speeddial for a Contact
You can create a speeddial to use for a specific contact in your Contacts List allowing
you to call the number quickly.
To create a speeddial for a contact:
1. In Idle mode, press OK z to display the Main Menu.
2. Select Contacts
c
and press OK z.
3. Select the contact for which you want to create a speeddial, and press the Options
softkey.
4. Select Speeddial , and press OK z.
5. Select a speeddial key (from 1 through 9) to assign to the contact.
6. Press the Add softkey to add the contact to that speeddial key.
The speeddial is immediately applied.
7. Press the red key to exit.
Note: To call a speeddial entry press the speeddial number and then press OK z .
Note: In the speeddial screen, to replace an existing entry select the speeddial entry
you want to replace, and press the
Replace softkey. To delete a speeddial key, scroll to
the speeddial you want to delete and press the Delete softkey.
Groups of Contacts
Adding contacts to groups allows you to view pages of entries by group, simplifying
looking people up in a large Contacts List. You can also assign ring tones to groups of
contacts, helping you identify incoming calls.
Creating a Contact Group
Before you can add a contact to a group, you must create the empty group. Each
group has its own page in the Contacts List accessed using the right and left
navigation keys.
To add a group to your Contacts List do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Contacts
c
and press OK z.
3. Press the Options softkey.
4. Scroll down to select Groups and press OK z.
5. Press the Options softkey again.
6. Select Add group and press OK z.
7. Enter the name for your new group, and press OK z.
8. Press the Yes softkey when prompted to save.
CLR CLR