Haltech Platinum PRO PLUG-IN Nissan Skyline R34 GT-R (HT055006) - Manual (Page 3)

Notes PLATINUM Pro Plug-in Nissan Skyline R34 GT-R
Quick Start Guide
Congratulations on purchasing a Haltech Engine Management System.
This fully programmable Plug and Play product opens the door to virtually limitless
performance modification and tuning of your vehicle. Programmable systems allow you
to extract all the performance from your engine by delivering precisely the required
amount of fuel and ignition timing that your engine requires for maximum output under
all operating conditions.
This quick start guide will walk you through installation of the Platinum Pro ECU into
a vehicle. This guide is accompanied by the full service manual located on the software
CD provided with the ECU that you or your tuner will need to refer to before completing
your installation and configuration. The Manual can also be downloaded from the
Haltech website
www.haltech.com
Supported Vehicles
The Platinum Pro Plug-in Nissan Skyline R34 GT-R ECU supports the following:
Nissan Skyline R34 GT-R
Platinum Pro Plugin Nissan Skyline R34 Kit Includes
• Haltech Platinum Pro Plug-in ECU
• USB Cable
• Software CD
• Quick Start Guide
• Haltech Sticker
Optional Accessories ( Sold Separately )
• Rear Auxiliary Harness ( HT040003 )
• 3 Bar Map Sensor ( HT010104 )
• Air Temperature Sensor ( HT010200 )
Loaded Basemap
Your Platinum Pro Plug-in has been programmed with a basemap to suit a
Nissan R34 GT-R running a RB26DETT engine using the standard MAF sensors.
Alternatively, a basemap using the Haltech ECU Internal MAP Sensor as a load
reference is available in the C:\Users\XXXX\Documents\Haltech\ECU Maps\Nissan\R34
folder for you to upload into your ECU.
Please make sure you connect the Haltech ECU Internal MAP sensor to the intake
manifold prior to starting the vehicle.
Please ensure you load, modify and check the corresponding basemap for your
application before attempting to start the vehicle