Haltech Platinum PRO PLUG-IN Mitsubishi Evolution 9 2005 - 2007 (HT055064) - Manual (Page 4)

ECU Installation
To install your new Platinum Pro Plug-in to your Mitsubishi Evo 9, please follow the
procedures below.
• Please Note the following Installation photos based on a Mitsubishi Evolution 9 (ADM)
You will require the following tools
• Small Flat Screwdriver
• Socket set with 10mm socket
1. Ensure Ignition is off.
2. Locate your factory ECU. This will be located on the passenger side of the vehicle
behind the glove compartment.
Figure 1 – ECU Location
ECU Pinout
Figure 10 – Platinum Pro Plug-in Mitsubishi Evo 9 ECU Pinout