Haltech Platinum PRO PLUG-IN HONDA DC5 2005 - 2006 (HT055048) - Manual (Page 4)

ECU Installation
To install your new Platinum Pro Plug-in to your Honda DC5, please follow the
procedures below.
* Please Note the following Installation photos based on a Honda Integra DC5 (ADM)
You will require the following tools
• Small Flat Screwdriver
• Socket set with 10mm socket
• Platinum Mounting Kit (HT039000) or Cable Ties / 3M Velcro tape or similar
1. Locate your factory ECU. This will be located on the passenger side of the vehicle
under the glove compartment.
Figure 1 – ECU Location
ECU Pinout
Figure 10 – Platinum Pro Plug-in Honda DC5 ECU Pinout