HID Cisco ASA and 4TRESS AAA Server - Manual (Page 20)

ActivIdentity 4TRESS AAA Web Tokens and Cisco ASA | Integration Handbook P 20
External Use | June 8, 2012 | © 2012 ActivIdentity
3.0 ActivIdentity 4TRESS AAA Configuration
This chapter describes how to configure the ActivIdentity 4TRESS AAA Authentication Server.
3.1 Procedure 1: Configure Cisco Gate
A gate for the ActivIdentity 4TRESS AAA Server is a group of Network Access Servers (NAS) that is used to
simplify administration. For configuration details, refer to ActivIdentity 4TRESS AAA Server technical
documentation.
1. In the left pane of the Administration Console, expand the
Servers line.
2. Right-click on the server to which you want to add a gate, and then click New Gate.
3. Enter a Gate name (can be any string).
4. Select the option, RADIUS, corresponding to the protocol your Cisco uses.
5. Use the Authorized IP addresses and host names section to specify filter(s) for the gate.
6. Click Add, and then click OK.