HID Juniper and 4TRESS AS User Manual
Page 7
ActivIdentity 4TRESS FT2011 Web Tokens and Juniper Secure Access | RADIUS Channel Integration Handbook
P 7
External Use | May 1, 2012 | © 2012 ActivIdentity
4. Select the
Authentication required to search LDAP option, and then enter the appropriate Admin DN and
Password.
5. In the
Finding user entries section, specify a Base DN from which to begin searching for user entries, and
make sure that the
Filter is correct (for example:
samaccountname=<USER>).
6. At the bottom of the dialog, click
Save Changes (not illustrated).
2.2
Procedure 2: Create New RADIUS Authentication Server
When using an external RADIUS server to authenticate Juniper SA users, you must configure the server to
recognize the Juniper SA as a client and specify a shared secret for the RADIUS server to use to authenticate the
client request. To configure a connection to the RADIUS server on an SA Series SSL VPN appliance, perform the
following steps.
Getting Started
1. In the Admin
console, expand the
Authentication
menu, and then
click
Auth. Servers.
2. From the
New drop-down list, select Radius Server,
and then click
New Server.
The following dialog is displayed.