HID VMware View and AAA Server - Manual (Page 7)

ActivIdentity 4TRESS and VMWARE View 5.1 | Radius Integration Handbook P 7
External Use | August 8, 2012 | © 2012 ActivIdentity
3.0 ActivIdentity 4TRESS AAA Configuration
This chapter describes how to configure the ActivIdentity 4TRESS AAA Authentication Server.
3.1 Procedure 1: Configure VMWARE Gate
A gate for the ActivIdentity 4TRESS AAA Server is a group of Network Access Servers (NAS) that is used to
simplify administration. For configuration details, refer to ActivIdentity 4TRESS AAA Server technical
documentation.
1. In the left pane of the Administration Console, expand the Servers line.
2. Right-click on the server to which you want to add a gate, and then click New Gate.
1. Enter a Gate name (can be any string).
2. Select the option, RADIUS, corresponding to the protocol your VMWARE uses.
3. Use the Authorized IP addresses and host names section to specify filter(s) for the gate.
4. Click Add, and then click OK.