HID identiCLASS DTK Quick Start Guide - Manual (Page 4)

Page 4 July 2011
© 2010, 2011 HID Global Corporation. All rights reserved.
identiCLASS Quick Start Guide 3134-901, A.5
3700 Enhanced Reader Board
Connect the 3700 Enhanced Reader Board to the ID1 Enhanced Antenna. Then, connect
the Smart Card Adaptor to the 3700 Enhanced Reader Board.
3700 Enhanced
Reader
Board
Smart Card Adapter
(SIM Size)
ID1 Enhanced Antenna
USB
Coaxial
Cable
1 m (3.28 ft)
identiCLASS on your Computer
System Requirements
Computer/Processor 1 GHz 32-bit (x86) or 64-bit (x64)
USB Port
Operating System Windows XP SP3 plus .NET Framework 3.5 SP1.
Note: The identiCLASS DTK installs the .NET
framework if not available.
Memory 1 GB
Hard Disk 1 GB
Internet Browser Mozilla Firefox
Microsoft Internet Explorer
Installing Drivers
1
Insert the USB Flash Drive and installation starts automatically. The drivers are
installed on your computer. If the installation does not start automatically, open
My Computer, navigate to the USB Flash Drive identiCLASS DTK and click
start.bat.
2
Connect the reader board to your computer using the provided USB cable.
3
Once the drivers are installed, verify the reader is operational using the
identiCLASS Software Configuration Tool.