HID DTC1000/4000/4500 Ethernet User Guide - Manual (Page 15)

DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide L001411
(Rev.1.1)
15
Telnet Command Command Purpose Command Format
faults.
dest Change the destination
of a system log path.
This may be set to
none, e-mail, udp or
tcp. set logpath <LOG_NAME> dest
none|email|udp|tcp
email Change the e-mail
address for e-mail
notification for a
system log path. It
must specify a valid e-
mail address. set logpath <LOG_NAME> email
<EMAIL>
udp Specify the IP address
of the UDP system
logging program. set logpath <LOG_NAME> udp
<IPADDRESS>
from Restore system log
path settings from the
default or current
settings. set syslog from default|stored
set user add Add a new User
definition.
Up to four (4) Users
may be defined.
set user add <NAME>
del Delete a User
definition. set user del <NAME>
passwd Define a new password
for a User. set user passwd <NAME>
[<PASSWORD>]
type Specify a User as root
or guest.
Only root Users have
administrative rights to
change network
interface settings.
set user type <NAME>
root|guest
from Restore User setting
from default or stored
settings. set user from default|stored
store net addr Store a new IP store net addr <ADDRESS>