HID DTC4500e User Guide - Manual (Page 60)

DTC4500e_User Guide_EN, PLT-01669, Rev. 1.1
Page 60 April 2014
Window TAB Procedure
Select No Parity to change the Character Parity to none.
Select Even Parity to change the Character Parity to Even Parity.
Select Odd Parity to change the Character Parity to Odd Parity.
Note: This is the default for all tracks.
Reverse Bit Order is used to reverse the character bits and is used for
the encryption of data in specific programs
Add Leading Zeros is used to add a set number of leading zeros to the
magnetic string in order to move the starting point of the encoded data in
specific programs for encryption of data.
4.10.2 Magnetic Track Options
The Magnetic Encoding Module encodes onto tracks in accordance with an ISO 7811-2 Magnetic
Stripe. For track locations, review the display below. Tabs are available on the Magnetic Encoding
tab with options for encoding data on each track.
4.10.2.1 Reviewing the ISO Track Locations
TRACK1 0.110"
TRACK2 0.110"
TRACK3 0.110"
0.130"
0.140"
0.223" 0.353" 0.493"