HID EDGE EVO Solo User Guide - Manual (Page 6)

Getting Started
2
NOTE: To install the Jumpstart shortcut, you need the Media Access Control (MAC) address of
your EDGE EVO Solo. Your installer put the MAC address on the EDGE EVO Solo Quick Start
card, or it is on the EDGE EVO Solo box. The MAC address is a unique number that identifies
your EDGE EVO Solo.
If you are using Linux or a Mac, you need to use a static IP address.
To download and install the Jumpstart shortcut:
1. Open your web browser.
2. In the field at the top of the browser window, enter the following: www.hidglobal.com/
SoloJumpstart.exe
3. Press Enter.
4. Use the run or open option to start the installation.
• If run or open is not an option, save the file to a folder. Using My Computer on your Windows
Desktop, navigate to where you downloaded the file and double-click the SoloJumpstart.exe
file.
• The Welcome window displays.
5. Click Next.
6. Enter the 12-character MAC address of your EDGE EVO Solo.
• Enter just the letters and numbers without any colons or other characters.
7. Click Next.
8. Select the shortcuts that will let you access Jumpstart.
• Be sure you know where you put the shortcuts.
9. Click Next.
• Jumpstart installs and displays the successful installation window when it is finished.
10.Click Finish.
• Now you can use the Jumpstart shortcut to access the EDGE EVO Solo management con-
sole.
Accessing the EDGE EVO Solo Management Con-
sole