Operation, Before startup, Start up – Karcher MV 5 User Manual

Page 21: Dry vacuum cleaning, Information filter bag, Wet vacuum cleaning, Working with electrical power tools

Advertising
background image

– 10

Caution

Always work with an inserted flat

fold filter - during wet as well as

dry vacuum cleaning!

Illustration

Remove the appliance head and take
the contents out of the container.

Turn the container, press in the
steering roller in the openings at the
base of the container till the end-
point.

Insert and lock the appliance head.

Clip the holder for the accessory
compartment onto the rear side of
the appliance.

Illustration

Connect accessories.

Illustration

Plug in the main plug.

Illustration

Turn on the machine.

Caution

Work with a dry flat fold filter only.

Check the filter for damage prior

to installation and replace as

necessary.

Illustration

For vacuuming dry dirt an additional
filter bag can be inserted if neces-
sary.

Caution

Only operate the filter cleaning

without a filter bag inserted, oth-

erwise the filter bag can get

damaged.

The filling level of the filter bag de-
pends on the dirt that is sucked in.

The filter bag needs to be replaced
more frequently while sucking in
fine dust, sand, etc.

Clogged filter bags can burst -
therefore make sure to replace the
filter bag in a timely manner!

Caution

Vacuum cold ashes only when

using a pre-filter.

Order no. basic design: 2.863-139.0,
premium design: 2.863-161.0.

Caution:

Immediately switch the appli-

ance off or pull the power plug if

foam forms or liquids escape!

Do not use a filter bag!

Note: If the container is full, a float
closes the suction opening, and the ap-
pliance works at a higher speed.
Switch off the appliance immediately,
and empty the container.

For vacuuming up moisture or wet-
ness pay attention to the correct
floor nozzle setting and connect the
corresponding accessories.

Adapt the adapter to the connection
diameter of the electric tool using a
knife if necessary.

Illustration

A) Plug the enclosed adapter onto
the handle of the suction hose and
connect the electric tool with the
connection.

Operation

Before Startup

Start up

Dry vacuum cleaning

Information filter bag

Wet vacuum cleaning

Working with electrical power

tools

21

EN

Advertising
This manual is related to the following products: