Karcher SB-Wash 5-10 Fp steel - Manual (Page 5)

- 1
Please read and comply with
these instructions prior to the
initial operation of your appliance. Retain
these operating instructions for future refer-
ence or for subsequent possessors.
1 Memory block
2 Currency
3 Value
4 Output signal for value
5 Teach Mode
Î Switch off the power supply.
Î DIL switch 10 on the switchboard S1 is
OFF - L-Block (B) 0 is actvie.
Î DIL switch 10 on the switchboard S1 is
ON - L-Block (B1) 1 is actvie.
(also see operating panel on the coin verifi-
er)
Note
Select correct memory block (see section
"Select memory block").
The coin verifier can be programmed for 16
coin types in two independent blocks (B).
Only one block is under operation. At the
factory, the current local currencies are
programmed on B 0 and the Euro coins
with acceptance bandwith (normal) on B 1
(see type plate).
Lock coin channels:
Î
Set corresponding DIL switch (1-8) to
ON.
Release coin channel:
Î
Set corresponding DIL switch (1-8) to
OFF.
The DIL switches (1-8) of the blocks S1/
S2 lock the following coin channels
Type plate
Selecting memory block
Lock coin channels
Switch block S1
DIL switch OFF ON
1 Coin channel 1 free blocked
2 Coin channel 2 free blocked
3 Coin channel 3 free blocked
4 Coin channel 4 free blocked
5 Coin channel 5 free blocked
6 Coin channel 6 free blocked
7 Coin channel 7 free blocked
8 Coin channel 8 free blocked
Switch block S2
DIL switch OFF ON
1 Coin channel 9 free blocked
2 Coin channel 10 free blocked
3 Coin channel 11 free blocked
4 Coin channel 12 free blocked
5 Coin channel 13 free blocked
6 Coin channel 14 free blocked
7 Coin channel 15 free blocked
8 Coin channel 16 free blocked
5 EN