Karcher HD 830 BS - Manual (Page 17)

– 6
 Screw off water supply hose and high
pressure hose.
 Operate device for max. 1 minute until
the pump and conduits are empty.
Note
Observe handling instructions of the anti-
freeze agent manufacturer.

Pump in conventional frost protection
agents through the appliance.
A certain corrosion protection is achieved
with this as well.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.

Push the appliance.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.
You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract. Please take advice
on this matter.
ƽ
Danger
Risk of injury if the machine is left running
in an unattended state. Remove the spark
plug before doing any work on the appli-
ance.
Risk of burns! Do not touch hot silencers,
cylinders or radiator ribs.
Carry out maintenance tasks to the engine
according to the specifications provided in
the operating instructions of the engine
manufacturer.
 Check the high pressure hose for dam-
ages (risk of bursting). Please arrange
for the immediate exchange of a dam-
aged high-pressure hose.
 Check pump for leaks.
3 drops per minute are permitted and
can come out from the lower side of the
appliance. Call Customer Service if
there is heavy leakage.
 Check oil level in the oil tank.
Please contact Customer Service im-
mediately if the oil is milky (water in oil).
 Clean the sieve in the water connection.
 Clean filter at the detergent suck hose.
Check oil level in the HP pump.

Ready a catch bin for appr. 1 Liter oil.
 Turn out the oil drain screw.
 Drain the oil in a collection basin.
 Replace washers of the oil drain screw.
 Turn out the oil drain screw.
 Slowly fill in new oil until the "MAX"
marking on the oil container.
Note
Air pockets must be able to leak out.
For oil type refer to technical specifica-
tions.
Drain water
Flush device with anti-freeze agent
Transport
Storage
Maintenance and care
Motor
High-pressure pump
Before each use
Weekly
For the first time after one year or after
100 operating hours; then once a year or
after 500 operating hours
Dispose of old oil ecologically or turn it in
at a collection point.
17 EN