Device elements, Start up, Anti-static system – Karcher NT 35-1 Tact Te User Manual
Page 14: Dry vacuum cleaning, Installing the paper filter bag/fleece filter bag, Changeover from wet to dry vacuum cleaning, Wet vacuum cleaning, Inserting the rubber lips, Remove the paper filter bag/fleece filter bag, Device elements start up
– 2
1 Electrodes
2 Suction hose
3 Cable hook
4 Air outlet, working air
5 Suction head lock
6 Wheel
7 Air inlet, motor cooling air
8 Suction head
9 Steering roller
10 Dirt receptacle
11 Suction support
12 Floor nozzle
13 Suction tube
14 Carrying handle
15 Filter cover
16 Bender
17 Rotary switch for suction output (min-
max)
18 Indicator lamp
19 Socket
20 Automatic filter dedusting
21 Main switch
22 Flat fold filter
23 Filter dedusting
24 Floor nozzle holder
25 Holder for crevice nozzle
26 Holder for suction pipes
27 Power cord
28 Nameplate
Caution
The flat pleated filter must always be in
place while vacuuming.
Only for appliances with built-in socket:
Static charge is deflected by providing
earthing to the connection nozzles. This
prevents the formation of sparks and cur-
rent shocks due to attachments (option)
with electrical conductivity.
–
To vacuum fine dust, you can also use
an additional paper filter bag, a fleece
filter bag (option) or a membrane filter
(option).
Illustration
Release and remove the suction head.
Insert the paper filter bag, fleece filter
bag (option) or membrane filter (option).
Insert and lock the suction head.
Caution
Please note the following when switch-
ing from wet to dry vacuum cleaning:
If you vacuum dry dust while the filter ele-
ment is still wet the filter will become ob-
structed and may be damaged beyond
repair.
Dry the wet filter properly before use or
replace it with a dry one.
Change the filter, if required, according
to instructions under the section "Main-
tenance and Care".
Note: For permanent wet vacuum cleaning
it is advisable to use a PES flat pleated filter
(see filter systems).
Illustration
Remove the brush strips.
Install the rubber lips.
Note: The structured side of the rubber lips
must point outwards.
–
If the appliance is used to vacuum wet
dirt, the paper filter bag, the fleece filter
bag (option) or the membrane filter (op-
tion) must always be removed.
–
It is recommended to use a special filter
bag (wet) (see Filter systems).
Device elements
Start up
Anti-static system
Dry vacuum cleaning
Installing the paper filter bag/fleece filter
bag
Changeover from wet to dry vacuum
cleaning
Wet vacuum cleaning
Inserting the rubber lips
Remove the paper filter bag/fleece filter
bag
14
EN