Karcher SC 1-030 B - Manual (Page 22)

– 13
Often, failures have simple causes and you
can do the troubleshooting yourself using
the following overview. If you are in doubt
or if the failure is not listed here please con-
tact the authorized customer service.
ƽ
Danger
Always disconnect the mains plug and al-
low the steam cleaner to cool down before
performing any maintenance work.
Repair works may only be performed by the
authorized customer service.
 Descale the steam boiler.
 Turn off the appliance.
 See „Refilling Water“ Page 9.
Steam switch is secured with the lock /
child-proof lock.

Move the selector switch for the steam
volume to the front.
During longer breaks from ironing, the
steam in the steam line can condense.

Direct the first burst of steam at a sepa-
rate piece of cloth.
 Set the thermostat to level •••.
 Rinse or decalcify the boiler of the
steam cleaner.
 Press the steam gun until less water is
emitted.
 Descale the steam boiler.
Subject to technical modifications!
Troubleshooting
Long heating-up time
Steam boiler is decalcified
No steam
No water in the steam boiler.
Steam lever cannot be pressed
anymore
After breaks during ironing, water drops
will come out of the steam pressure iron.
Steam iron "spits out" water!
High water output
Steam chamber too full
Steam boiler is decalcified
Technical specifications
Electrical connection
Voltage
220-240
1~50/60 V
Hz
Protection class IP X4
Protective class I
Performance data
Heating output
1500 W
Heating output steam iron 700 W
Operating pressure max. 0,32 MPa
Heating time 8 Minutes
Steam volume
Continuous steaming
40 g/min
Steam push max. 100 g/min
Dimensions
Boiler capacity
1,0 l
Length 380 mm
Width 254 mm
Height 260 mm
Weight (without accessories) 2,9 kg
22 EN