Karcher Aspirateur eau et poussières NT 55-2 Tact Me I - Manual (Page 14)

– 2
1 Electrodes
2 Suction hose
3 Push handle
4 Suction head lock
5 Intermediate ring
6 Wheel
7 Chassis
8 Dirt receptacle
9 Steering roller of the chassis with park-
ing brake
10 Suction head
11 Steering roller of the dirt container
12 Floor nozzle
13 Suction tube
14 Bow of the placement mechanics
15 Handle of the dirt container
16 Suction support
17 Filter cover
18 Hose and cable hook
19 Bender
20 Electrode extension
21 Rotating knob
22 Carrying handle
23 Floor nozzle holder
24 Holder for crevice nozzle
25 Holder for suction pipes
26 Nameplate
27 Flat fold filter
28 Power cord
29 Filter dedusting
– The operating elements for the cleaning
process are yellow.
– The controls for the maintenance and
service are light gray.
Caution
The flat pleated filter must always be in
place while vacuuming.
Static charge is deflected by providing
earthing to the connection nozzles. This
prevents the formation of sparks and cur-
rent shocks due to attachments (option)
with electrical conductivity.
– When vacuuming up fine dust, a dis-
posal bag (optional accessory) can ad-
ditionally be used.
 Lock parking brakes.
Illustration

Pull up the bow of the placement me-
chanics. The container is unlocked and
lowered.
Illustration

Pull the container out by the handle.
Illustration

Insert the disposal bag so that it is snug
against the reservoir wall and the reser-
voir bottom.
 Pull disposal bag over the container.
Ensure that the disposal bag is not
pulled over the suspension lug on the
container.
 Reinstall the container and lock it by
means of the bow of the placement me-
chanics.
ṇ
Warning
Crush hazard. Never hold your
hands between the dirt contain-
er and the intermediate ring or
put them near the lifting mecha-
nism while locking. Lock the container by
actuating the bow of the placement me-
chanics with both hands.
Device elements
Colour coding
Start up
Anti-static system
Dry vacuum cleaning
Installing the dust disposal bag
14 EN