Avenview FO-HDSDI-L-SET - Manual (Page 4)

www.avenview.com 4
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
The FO-HDSDI-L-SET is an ideal and economic solution designed for transmission of multi-rate SDI video, with
embedded audio and metadata over a multi-mode optical fiber cable.
The transmitter module (FO-HDSDI-L-S) receives one HD-SDI electrical input, perfectly converts SMPTE 292M,
SMPTE 259M, or DVB-ASI electrical SDI signal to multi-mode optic SDI signals. The receiver module
(FO-HDSDI-L-R) receives optical signal from input LC connector, and then perfectly converts it to electrical SDI
signal. Both transmitter and receiver provide equalizing and re-clocking at input unit in order to re-construct
the signal for consistent quality. The FO-HDSDI-L-SET is perfect for today’s broadcast applications, including
video production, video editing, studio to studio and studio to CATV head end. In addition, since transmission
of content is inherently secure and immune to outside interference, fiber applications are favored in
government, military, and medical environments.