Approach Tech DVR-3016 - Manual (Page 56)

54
6.2 Connection Testing
With the previous settings, follow the instructions below to ensure whether you have established the
connection successfully.
1
. Click Start Command Programs
2
. Type in ping 192.168.1.1 then Enter. (See the sample screen below)
** This IP is the DVR IP address that is assigned for the connected DVR.
3.
If you receive a response as in the sample screen below, the connection hasn’t been successfully
established. Please re-check all the hardware and software installation by repeating steps 1 to 5. If you still
can’t establish the connection after rechecking, please contact your dealer.