ATI Technologies RADEON X1950 XTX - Manual (Page 51)

45
To access and enable CrossFire ™ in Catalyst ™ Control Center, do the
following:
• Click CrossFire ™ in Advanced View. Then, select Enable
CrossFire ™ .
When CrossFire ™ is successfully enabled, all display devices except
the one used by CrossFire ™ will be disabled. Multiple monitors/
displays that are disabled when CrossFire ™ is enabled reappear after
CrossFire ™ is disabled.
To change to Advanced View:
• Click the Dashboard View button and select Advanced View.
• Select Displays Manager in the tree view.
7 What is the difference between a CrossFire ™ Edition graphics
card and a standard graphics card from the same family?
CrossFire ™ Edition graphics cards include a “compositing engine”, a
chip that takes the partially rendered image from the Slave graphics
card and merges it with the partially rendered image from the Master