Playback order of mp3/wma files, About mp3 files, About wma files – Sony CDX-M10 User Manual

Page 15: Maintenance, Removing the unit, Maintenance removing the unit, Playback order of mp3/wma files about mp3 files

Advertising
background image

15

Playback order of MP3/WMA files

About MP3 files

• MP3, which stands for MPEG-1 Audio Layer-3, is

a music file compression format standard. It
compresses audio CD data to approximately 1/10
of its original size.

• ID3 tag versions 1.0, 1.1, 2.2, 2.3 and 2.4 apply to

MP3 only. ID3 tag is 15/30 characters (1.0 and
1.1), or 63/126 characters (2.2, 2.3 and 2.4).

• When naming an MP3 file, be sure to add the file

extension “.mp3” to the file name.

• During playback or fast-forward/reverse of a VBR

(variable bit rate) MP3 file, elapsed playing time
may not display accurately.

Note
If you play a high-bit-rate MP3, such as 320 kbps,
sound may be intermittent.

About WMA files

• WMA, which stands for Windows Media Audio,

is a music file compression format standard. It
compresses audio CD data to approximately 1/22*
of its original size.

• WMA tag is 63 characters.
• When naming a WMA file, be sure to add the file

extension “.wma” to the file name.

• During playback or fast-forward/reverse of a VBR

(variable bit rate) WMA file, elapsed playing time
may not display accurately.

*

only for 64 kbps

Note
Playback of the following WMA files is not supported.
– lossless compression
– copyright-protected

If you have any questions or problems concerning
your unit that are not covered in this manual, consult
your nearest Sony dealer.

Maintenance

Fuse replacement

When replacing the fuse, be
sure to use one matching the
amperage rating stated on the
original fuse. If the fuse blows,
check the power connection and
replace the fuse. If the fuse
blows again after replacement,
there may be an internal
malfunction. In such a case,
consult your nearest Sony
dealer.

Cleaning the connectors

The unit may not function properly if the connectors
between the unit and the front panel are not clean. In
order to prevent this, detach the front panel (page 4)
and clean the connectors with a cotton swab. Do not
apply too much force. Otherwise, the connectors
may be damaged.

Notes
For safety, turn off the ignition before cleaning the

connectors, and remove the key from the ignition
switch.

Never touch the connectors directly with your fingers

or with any metal device.

Removing the unit

1

Remove the protection collar.

1

Detach the front panel (page 4).

2

Engage the release keys together with the
protection collar.

Folder
(album)

MP3/WMA file
(track)

MP3/WMA

continue to next page

t

Fuse (10 A)

Main unit

Back of the front
panel

Orient the release
keys as shown.

Advertising
This manual is related to the following products: