Alpine CDA-9856 - Manual (Page 24)

22
-EN
01GB05CDA9856.fm
ALPINE CDA-9856 68-04123Z46-A (EN)
An iPod™, iPod™ mini or iPod™ nano can be connected to the
CDA-9856 by using the proprietary ALPINE FULL SPEED™
Connection Cable (KCE-422i). When the CDA-9856 is connected by
using the cable, the controls on the iPod™ are not functional.
About iPods™ usable with this unit
The unit can be used with third generation and above iPod™ photo,
iPod™ minis or iPod™ nano. iPod™ Shuffle cannot be used, however.
• Touch wheel or scroll wheel type iPods without the dock connector
cannot be connected to the unit.
• The unit can be used with the following iPod versions. Correct
function of earlier versions cannot be guranteed.
Third generation iPod: Ver. 2.3
Forth generation iPod: Ver. 3.0.2
iPod photo: Ver. 1.0
iPod mini: Ver. 1.3
iPod nano: Ver. 1.0
• The unit cannot be used with the software versions earlier than 22nd
Feb.2005. For details about “iPod Software Update,” refer to the
iPod Instruction Manual.
Playback
1
Press SOURCE/POWER to switch to the iPod
mode.
2
Press or to select the desired song.
3
To pause playback, press / .
Pressing / again will resume playback.
• If a song is playing on the iPod when it is connected to the
CDA-9856, it will continue playing after the connection.
Searching for a desired Song
An iPod can contain hundreds of songs. By keeping these songs
organized in playlists, the CDA-9856 can use these to ease song
searches.
1
Press to activate the search selection mode.
2
Turn the Rotary encoder to select the PLAYLIST
search mode, then press
.
PLAYLIST ARTIST ALBUM SONG PLAYLIST
3
*
1
Turn the Rotary encoder to select the desired
Playlist.
4
Press / .
The selected Playlist is played back.
To search for a song in the selected playlist
1 After selecting the playlist in step 3* 1 , press to change
to the song search mode of the selected playlist.
2 Turn the Rotary encoder to select a song and press
MODE.
The selected song is played back.
• While in the search mode, if you press and hold for at least 2
seconds, or no operation is performed for 10 seconds, the search
mode is canceled.
• In the search mode, pressing FUNC. will return to the previous
mode.
• All songs in the iPod are played back by selecting the stored “iPod
name” in step 3* 1 .
• Playlist search cannot be made during M.I.X. play.
• “NO SONG” will be displayed if there are no songs in the selected
playlist in the PLAYLIST search mode.
1
Press to activate the search selection mode.
2
Turn the Rotary encoder to select the ARTIST
search mode, then press
.
PLAYLIST ARTIST ALBUM SONG PLAYLIST
3
*2 Turn the Rotary encoder to select the desired
Artist.
4
Press / .
The selected Artist song is played back.
To search for an album of the selected artist
1 After selecting the artist in step 3* 2 , press to change
to the album search mode of the selected artist.
2 *1 Turn the Rotary encoder to select an album.
3 Press the / to play back all songs of the selected
album.
iPod™ (Optional)
Return to the beginning of the current song:
Press .
Fast backward:
Press and hold .
Advance to the beginning of the next song:
Press .
Fast forward:
Press and hold .
SOURCE/POWER
MODE
Rotary encoder
4
5
TITLE
/
6 FUNC.
Searching by Playlist
Searching by artist name
01GB00CDA9856.book Page 22 Thursday, October 20, 2005 4:33 PM