Troubleshooting – Aga Ranges 115V User Manual

Page 7

Advertising
background image

In the Event of a Power Failure

Most power failures are corrected within two hours and
will not affect the unit’s temperature providing you
minimize the number of door openings while the power is
off. A gradual rise in temperature should not have any
adverse effect on your wine if power is out for a longer
period. If it is extremely hot, you may want to move your
wines to the coolest location you can find until power is
restored.

Help Prevent Tragedies

Each year children die because they climb inside a
discarded refrigeration product, get trapped inside and
suffocate. Take precautions to prevent such tragedies by
removing the door, taping or chaining it shut before
discarding.

Disposal

When you dispose of this product, do so in a way
sympathetic to the environment. For further information
contact your local authority.

Important Safety Issue

In using your wine chiller only pull out one shelf at a time
access your wine bottles. When you are finished using a
shelf, push it gently back into the cabinet before pulling
out the next shelf.

What to Do If You Need Service

Before calling for service, check the trouble shooting table.
This table lists possible problems that you can remedy
without difficulty to avoid an unnecessary service call.

If you do need service, contact your dealer or the
manufacturer. In any correspondence, refer to the model
number and serial number of your unit which is located
on the lower front cabinet flange. Retain your proof of
purchase. You may want to record these numbers in the
space provided on page 7. Follow the procedure outlined
on page 8.

Troubleshooting

All specifications and product design subject to change without notice.

Such revisions do not entitle the buyer to corresponding changes, improvements,

additions, replacements or compensation for previously purchased products.

7

Problem

Odor in cabinet

Noisy operation

Cabinet vibrates

Cabinet light not working

Appliance will not run

Appliance runs too long

Moisture collects inside

Moisture collects on outside surface

Interior too hot/too cold

Possible Causes/Solutions

• Interior needs cleaning

• Cabinet not level
• Weak floor

• Cabinet not level
• Weak floor

• Tube burned out
• No power at outlet

• Temperature control turned to “OFF”
• Line cord not plugged in
• No power at electrical outlet
• House fuse blown

• Prolonged door openings
• Control set too cold
• Condenser needs cleaning

• Too many door openings
• Prolonged door openings
• Hot, humid weather increases condensation

• Hot, humid weather increases condensation.

As humidity decreases, moisture will disappear.

• Control improperly set.

• Control improperly set
• Faulty thermometer
• Relocate thermometer to center of cabinet

and recheck

Advertising
This manual is related to the following products: