Reversing t.e.f.c. motor mount assembly – American Dryer Corp. D75 User Manual
Page 21
450592 - 3
Telephone: 01422 822282 / Fax: 01422 824390
21
Reversing T.E.F.C. Motor Mount Assembly
Illus. No.
Part No.
Qty.
Description
1
100109
1
4L-650 V-Belt (to idler assembly)
2
100701
1
3/16” x 3/16” x 1” Key
3
101139
1
5/8” x 2-3/4” Motor Pulley
4
120200
1
3/8” x 90° Connector
5
181003
1
1/2 hp 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor (56Z frame)
6
150501
4
5/16-18 x 3/4” Tap Bolt
7
153002
4
5/16” Lock Washer
8
153001
4
5/16” Flat Washer
9*
100075
1
1 hp 200-230/460/60 380-415/50 Motor
(for models mfd. as of February 8, 2003)
100007
1
1/2 hp 220/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor
with 1/2” Shaft (56Z frame)
(for models mfd. prior to February 8, 2003)
10
120200
1
3/8” x 90° Connector
11
150501
4
5/16-18 x 3/4” Tap Bolt
12
153002
4
5/16” Lock Washer
13
153001
4
5/16” Flat Washer
14
154000
8
5/16-18 Tinnerman Nut
15
152004
7
5/16-18 Hex Nut
16
153002
7
5/16” Lock Washer
17
153001
7
5/16” Flat Washer
18
850021
1
Reversing Motor Mount ONLY (56Z frame)
803885**
1
50 Hz Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 24)
19
117604
4
Neoprene Sponge Tape (sold by the foot)
20
153051
1
3/4” S.A.E. Flat Washer
21
100714
1
3/16” x 3/16” x 1-7/8” Key
22
882670
1
16” Impellor (3/4” bore)
(for models mfd. as of February 8, 2003)
802100
1
16” Impellor (1/2” bore)
(for models mfd. between August 2, 2002 and February 8, 2003)
100604
1
12-1/2” Impellor (1/2” bore)
(for models mfd. prior to August 2, 2002)
23
153050
***
1/2” S.A.E. Flat Washer
24
152006
2
1/2-20 Left Hand Jam Nut
*
Check part number on motor data label to verify correct motor.
** Specify voltage when ordering.
*** As required.