Audiovox GMRS762CH User Manual

Page 9

Advertising
background image

128-7627

9 of 28

Power On-Off/SCAN (8) Button

Press and hold the power on/off button (

s

) for at least 2 seconds.

You will hear a confirming melody to indicate the unit is on. To turn the
unit off, press and hold the button for at least 2 seconds. When the unit
is on, press this button momentarily to enable or disable the scan
mode.

GMRS762CH Operational Modes

9

Controls:

LED Flashlight Enable Button (2)
When the unit is on, press this button on the left side of the Trans-
ceiver to light the white flashlight LED (10) on top of the unit.

Charging Indications

When either, or both, units are being charged in the charging stand, the
associated red LED charging indicator will light steadily. In addition, the
AC wall adapter LED will also light steadily. When fully charged, the
LEDs will be off.

Adjusting the Volume (13, 15)
With the unit powered on, press the Up Channel/Volume button (

S) to

increase volume and the Down Channel/Volume button (

T) to decrease

volume. The display will indicate the current volume level between 0 to 7
bars on the right lower side of the LCD.

Advertising