ATEN CS-88A User Manual
Page 23
M
Skip Mode
This feature allows you to switch between computers in order to monitor
them manually. You can dwell on a particular port for as long or as little as
you like - as opposed to Auto Scanning, which automatically switches after a
fixed interval. To invoke Skip Mode, key in the following Hotkey combination:
1. Invoke Hotkey Mode (see p. 15)
2. Key in [Arrow]
Where [Arrow] refers to the left or right Arrow key. After you press [Arrow],
you automatically exit Hotkey Mode, and enter Previous/Next Mode where
you can switch ports as follows:
←
Skips from the current port to the first accessible port previous to it.
(See Scan Mode, p. 26, for information regarding accessible ports.)
→
Skips from the current port to the next accessible port.
3. To exit Skip Mode, press [Esc] or [Spacebar]
Note: While Skip Mode is in effect, ordinary keyboard and mouse
functions are suspended - only Skip Mode compliant keystrokes
can be input. You must exit Skip Mode in order to regain normal
control of the console.
2002-12-27
CS-88A User Manual
19