Audiovox VE-560 - Manual (Page 9)

128-6317
G. Clock Operation
1. Connect the power to the unit, the LCD in the front panel will display the
time.
2. Press the TIME SET button once (the hour will start to blink) press TIME
ADJUST up/down direction buttons to adjust the hour, press TIME SET again
(the minute will start to blink) press TIME ADJUST up/down direction buttons
to adjust the minute. When the correct time is entered, press TIME SET again
to set time.
H. Remote Control
The remote control will operate Audiovox Televisions and Video Cassette Players.
It is not a universal remote control and will not control equipment from other
manufacturers.
If a universal remote control is to be used with the VE-560, choose the remote
encoding scheme for Audiovox Televisions when programming the remote.
1. TV/VIDEO
Press this button to select the TV mode or AV1/AV2.
2. POWER ON/OFF
Press this button to turn on the TV. The channel number or current video
source will be displayed on screen, and the picture will appear in a few seconds.
Press the button again to turn the TV off.
3. NUMERICAL BUTTONS
Use these buttons to make a direct channel selection. The channel number
chosen will be displayed on the screen for 4 seconds. Channel selection is
carried out with 0-9 keys (0-99ch) and “1—“ key when in cable mode (100-
125ch).
6