Alphasonik CAPACITOR PLD40E - Manual (Page 3)

3
Thank you for purchasing this Alphasonik product. Alpha-
sonik products are specifically engineered and designed for the mobile
audio environment. This manual contains important information about in-
stallation, set-up procedures and integrating your new Alphasonik product
into your vehicle. With proper care and installation, your new product will
provide you with many years of high performance listening enjoyment.
We recommend having an Authorized Alphasonik Dealer install your new
product for optimal performance and to take advantage of our warranty
program. Before installing your new product, please read through the
manual to fully understand the application.
Before making any electrical connections, make sure
that you disconnect the battery’s ground cable to prevent the possibility
of short circuits or damage to your electronic equipment. If your vehicle’s
stereo (head unit) comes with an Anti-theft code, DO NOT disconnect the
battery. If you have the access code for the stereo (head unit), please
refer to the vehicle’s owner’s manual.
Nickel-Plated RCA Connectors Four Channel Input & Output
Power On LED Indication Four Channel Independent Tuning
Minimum Input Level 200mV
Maximum Input Level 15V rms
Maximum Output Level 13.5V peak
Frequency Response 10Hz - 100kHz, +/-1dB
Total Harmonic Distortion 0.003%
Signal to Noise Ratio -13dB
Balanced Input Noise Rejection >60dB
Input Impedance 10 kohms
Output Impedance 150 ohms
Power Supply High headroom PWM
Power Draw 150mA
Recommended Fuse Rating 1 Amp
Dimensions W x L x H 9" x 3" x 1"
SPECIFICATIONS
Features
S
P
E
C
I
F
I
C
A
T
I
O
N
S