Day and time announcements, To set day and time, To check day and time – AT&T 1477 User Manual
Page 31
29
Answering System Operation
1
@
TIME/SET
“Monday, 12:00 am, 2003”
8
@
TIME/SET
“2003”
10
@
TIME/SET
“Tuesday, 1:01 am, 2004”
“To change clock,
press Time Set”
2
@
TIME/SET
“Monday”
3
@
CHANGE
“Tuesday”
Press until correct day is spoken
4
@
TIME/SET
“12 am”
5
@
CHANGE
“1 am”
Press until correct hour is spoken
6
@
TIME/SET
“00”
7
@
CHANGE
“01”
9
@
CHANGE
“2004”
Press until correct minute is spoken
Press until correct year is spoken
(Twice)
(Twice)
(Twice)
(Twice)
Day and time announcements
To set day and time
Before playing each message, the answering system
announces the day and time the message was received.
Before using the answering system, you should follow
the steps at left to set the day and time, so messages
are dated correctly.
The system uses voice prompts to guide you. Each time
you press
@
CHANGE
, the day, hour, minute or year
advances by one. When you hear the correct setting,
press
@
TIME/SET
to move to the next setting.
To check day and time
You can press
@
TIME/SET
at any time to hear the
current day and time without changing it.
NOTE:
Press
@
CHANGE
to advance the minute or year by one
digit at a time. Press and hold to advance by 10 digits at a time.
NOTE:
You can choose to set the time manually, or you can allow
it to be set automatically with incoming Caller ID information. The time will be
set automatically only if you subscribe to Caller ID service provided by your
local telephone company (see page 5).
91-5677-20-00.ATT1477.RO.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 29