Sony DVP-NS300 - Manual (Page 26)

26
qa Press ENTER.
DTS is selected.
qs Press X/x to select the item.
Choose the item that matches the audio connection you selected in page 21 to 23 (
through ).
qd Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
Note
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, select “QUICK” under SETUP in the Control Menu (page 54).
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in page 21 to 23
(
through ). Each of these are the default settings and do not need to be adjusted when
you first connect the player. Refer to page 56 for using the Setup Display.
Audio Cord Connection Type You select Page
D-PCM 59
DOLBY DIGITAL (only if the
amplifier/receiver has a Dolby
Digital decoder) 59
Audio Cord Connection Type You select Page
OFF 59
ON (only if the amplifier/receiver
has a DTS decoder) 59
Enjoying the surround sound effects
B-2 C-2
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
OFF
STANDARD
ON
DOWNMIX: DOLBY SURROUND
D-PCM
OFF
OFF
ON
B
A D
B-2 C-2
A D
B A D