Sony DVP-NS300 - Manual (Page 66)

66
Specifications
System
Laser Semiconductor laser
Signal format system NTSC
Audio characteristics
Frequency response DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1.0 dB)
DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio (S/N ratio) 115 dB (LINE OUT L/R (AUDIO) jacks 1, 2 only)
Harmonic distortion 0.003 %
Dynamic range DVD: 103 dB
CD: 99 dB
Wow and flutter Less than detected value (±0.001% W PEAK)
The signals from LINE OUT L/R (AUDIO) 1/2 jacks are measured. When you play PCM sound tracks with
a 96 kHz sampling frequency, the output signals from the DIGITAL OUT (COAXIAL and OPTICAL) jacks
are converted to 48 kHz sampling frequency.
Outputs
General
Power requirements 120V AC, 60 Hz
110 to 240V AC, 50/60 Hz
See page 3 for further information.
Power consumption 12 W
See page 3 for further information.
Dimensions (approx.) 430
Ч
74
Ч
256 mm (17 Ч 3 Ч 10 1 /
8
in.) (width/height/depth) incl.
projecting parts
Mass (approx.) 2.7 kg (5 lb)
Operating temperature 5
°
C to 35
°
C (41 °F to 95 °F)
Operating humidity 25 % to 80 %
Supplied accessories
See page 14.
Specifications and design are subject to change without notice.
E NERGY S TAR R is a U.S. registered mark. As an E NERGY S TAR R Partner. Sony Corporation
has determined that this product meets the E NERGY S TAR R guidelines for energy efficiency.
Jack name Jack type Maximum output level Load impedance
DIGITAL OUT (OPTICAL) Optical
output
jack -18 dBm Wave length: 660 nm
DIGITAL OUT (COAXIAL) Phono jack 0.5 Vp-p 75 ohms terminated
LINE OUT (AUDIO) (1, 2) Phono jack 2 Vrms (50 kilohms) Over 10 kilohms
LINE OUT (VIDEO) (1, 2) Phono jack 1.0 Vp-p 75 ohms, sync negative
S VIDEO OUT 4-pin mini DIN Luminance signal: 1.0 Vp-p
Color signal: 0.286 Vp-p 75 ohms, sync negative
75 ohms terminated
COMPONENT
VIDEO OUT (Y, P
B
, P
R
)
Phono jack Y: 1.0 Vp-p
P
B
, P
R
: 0.7 Vp-p
75 ohms, sync negative
75 ohms terminated