Sony KDL-40XBR7 - Manual (Page 24)

24
Indicators
Item Description
1 Speaker Outputs the audio signal.
2 SONY Logo The Sony logo will illuminate when the TV is powered on.
You can turn off the logo illumination, for details see page 53.
3 Light Sensor Senses room light level and adjusts the screen brightness
accordingly (see page 53 for details). Do not put anything
near the sensor or the nearby general area (as shown above),
as its function may be affected.
4 POWER LED Lights up in green when the TV is turned on.
5 STANDBY
LED
Lights up in red when your TV is in PC standby mode. If the
LED blinks in red continuously, this may indicate that the TV
needs servicing (see contacting Sony information on the back
cover).
6 PIC OFF/
TIMER LED
Lights up in green when the Picture Off feature is activated.
Lights up in orange when the timer is set. When the timer is
set, this LED will remain lit even if the TV is turned off. For
details, see page 40 (Timer) and page 53 (Picture Off).
7 (IR) Infrared
Receiver
Receives IR signals from the remote control. Do not put
anything near the sensor, as its function may be affected.
POWER
STANDBY
PIC OFF / TIMER
1
2
3
4
5
6
7