Using the self-timer, Lcd screen indicators during recording – Sony DSC-P30 User Manual

Page 27

Advertising
background image

BBBB

Rec

o

rd

ing

27

When you use the self-timer function, the subject is recorded about 10 seconds after
you press the shutter button.
Clear the menu (page 40), then press the control button

V ( ). The (self-timer)

indicator appears on the LCD screen, and the recording starts about 10 seconds after
you press the shutter button. The self-timer lamp flashes and the beep sounds after
you press the shutter button until the shutter is released. To stop the self-timer
recording, press the control button

V ( ) again.

Each time you press DSPL/LCD ON/OFF, the status of the LCD screen changes as
follows: all indicators on

t indicators off t LCD screen off.

These indicators are not recorded. See page 86 for a detailed description of the
indicators.

Note

If you remove the battery or otherwise turn off the power partway through a recording, the
moving image recorded thus far is not saved. When the battery low mark

E appears while

operating the camera with batteries, stop the recording at this point before the batteries
completely run out.

6

Press the shutter button fully down.
“REC” appears on the LCD screen, and the image is recorded on the “Memory
Stick.”
Sound cannot be recorded with moving images.

7

Press the shutter button fully down again to stop recording.
The recording stops. Or, the recording stops when the “Memory Stick” is full.
For details on the image size, see “Setting the image size (IMAGE SIZE)” on
page 45”.

Using the self-timer

LCD screen indicators during recording

Advertising
This manual is related to the following products: