Sony NWZ-W262BLK User Manual

Page 48

Advertising
background image

Press the

button shortly during ZAPPIN playback.

Normal playback

Starting ZAPPIN playback

1. Press and hold the

button for longer than 1 second during normal playback.

The voice guidance “Zappin in” is heard and ZAPPIN playback starts.

(*1) Press and hold the

button for longer than 1 second.

Note

If the most recognizable part of a song cannot be found, the song is played back a point
about 45 seconds from the beginning. If the length of the song is less than 45 seconds, the
song is played back from a point somewhere before the end of the song.
To find the most recognizable part of a song, the song must first be analyzed through 12
TONE ANALYSIS. Transfer songs using Content Transfer which will analyze songs by 12
TONE ANALYSIS. Check that 12 TONE ANALYSIS is set to [Automatic] or [Always ON.]

Skipping to the previous/next song, shuffle playback, or playlist

playback during ZAPPIN playback

During ZAPPIN playback, you can skip to the previous/next song, play shuffle playback, or play a
playlist.
The operating procedure is same as that for normal playback.

Changing the playback time of song clips in ZAPPIN playback

The playback time for song clips can be set to either “Long” or “Short.”

ZAPPIN short (4 seconds)

48

Advertising
This manual is related to the following products: