Sony PCG-GRX510P - Manual (Page 63)

Connecting a Port Replicator
63
5 Turn on the notebook.
To remove your notebook from the port replicator
1 Double-click in the taskbar. The “Safely remove ...” dialog box opens.
2 Click the dialog box. When the message, “Safe to Remove Hardware”
appears, click Close.
3 Once all active peripheral devices are disengaged, disconnect the device
connectors from the port replicator.
4 Pull the release levers on each side of the port replicator to release the
notebook from the port replicator.
Attaching Notebook to Port Replicator
✍
When attaching your notebook to the port replicator, do not attempt to insert or
remove the battery pack. Lifting and turning the notebook with an attached port
replicator could cause a temporary loss of power.
Notebook
Port replicator