Sony PCG-GRX510P - Manual (Page 73)

Connecting a Parallel Port Printer
73
Connecting a Parallel Port Printer
You can connect a Windows® XP operating system-compatible printer to the
port replicator (not supplied) or the notebook.
To connect a printer to the notebook
1 Locate the Printer port on the rear panel of the notebook or the port
replicator.
2 Plug the printer cable (supplied with the printer) connector into this port.
✍
You may need to change the printer settings before you use the printer. See
“Displaying the Sony Notebook Setup Screen” for more information.
Connecting a Parallel Printer to the Notebook
✍
See the manual that came with your printer for more information on its installation and
use.
If your printer stops functioning after resuming from a power saving mode, see
“Troubleshooting the Printer” for more information.
Printer
Power cord
Printer cable
(supplied with the printer)
To
Printer port