Attaching the battery pack, Attach the battery pack to this product, Help guide – Sony HDR-PJ540 User Manual

Page 113

Advertising

Digital HD Video Camera Recorder

HDR-CX530E/CX540/CX610E/PJ530E/PJ540/PJ540E/PJ610E

Attaching the battery pack

Attach the battery pack to this product.

1. Close the LCD monitor and attach the battery pack ( ).

Align the indentation on this product and projection on the battery pack, then slide the battery pack upwards.

To remove the battery pack

Turn off this product. Slide the battery release lever ( ) and remove the battery pack ( ).

Note

You cannot use any InfoLITHIUM battery pack other than the V series to this product.
When attaching a video light (sold separately), it is recommended that you use an NP-FV70 or NP-FV100 battery
pack.
You cannot use the NP-FV30 InfoLITHIUM battery pack with this product.
In the default setting, the power turns off automatically if you leave this product without any operation for about 2
minutes, to save battery power (Power Save).