Sony DCR-SR62 - Manual (Page 20)

20
7 Remote sensor*
3
Receive the signal from the Remote
Commander.
8 Flash*
2
Flashes when using the flash.
9 LCD screen
To record in mirror mode, open the LCD
screen 90 degrees to the camcorder (1), then
rotate it 180 degrees to the lens side (2).
q; Zoom buttons
Press for zooming in/out.
qa BACK LIGHT button*
4
To adjust the exposure for backlit subjects,
press BACK LIGHT to display .. To cancel
the back light function, press BACK LIGHT
again.
qs DISP/BATT INFO button
You can switch the screen display when you
press while the power is set to on.
When you press while the power is set to OFF
(CHG), you can check the remaining battery.
qd EASY button
See page 16.
qf (flash) button*
2
You can select the settings for the flash.
qg Shoulder belt hook
Attach the shoulder belt (optional).
qh NIGHTSHOT switch*
2
To record in dark places, set the
NIGHTSHOT switch to ON. (
appears.)
qk Tripod receptacle (Bottom surface)
Attach the tripod (optional: the length of the
screw must be less than 5.5 mm (7/32 in.)) to
the tripod receptacle using a tripod screw.
ql RESET button
To initialize the settings (Reset), press
RESET to initialize all the settings, including
settings for date and time.
1 Power zoom lever
q; Zoom buttons
You can magnify still images from about 1.1
to 5 times the original size (Playback zoom).
• When you touch the screen during playback
zoom, the point you touched will be displayed in
the center of the displayed frame.
qd EASY button
See page 16.
qj Speaker
Sound comes out from the speaker while
playing back.
3 A/V OUT jack
Connect with the A/V connecting cable.
4 REMOTE jack*
3
Connect other optional accessories.
5 Active Interface Shoe *
3
The Active Interface Shoe supplies power to
optional accessories such as a video light, a
flash, or a microphone. The accessory can be
turned on or off as you operate the POWER
switch on your camcorder.
w; DC IN jack
wa Interface connector
Playback
Connecting to other devices