Sony NW-E505 - Manual (Page 2)

Transferring Playing back
Changing playback mode
1 Press and hold SEARCH/
MENU for half a second in
stop mode.
The menu screen is displayed.
2 Rotate the Shuttle switch to
select “Repeat Mode>” and
press
Nx to confirm.
3 Rotate the Shuttle switch to
select “Track Rep” and press
Nx to confirm.
4 Press SEARCH/MENU
repeatedly to exit menu
mode.
Transferring files to your
Network Walkman/Charging
Transfer tracks (audio data) stored in SonicStage [My Library] to the Network Walkman.
1 Connect your Network Walkman to your
computer and charge it.
“USB Connect” appears in the display.
The Network Walkman is rechargeable when connected to a
computer with the dedicated USB cable
When the remaining battery indication of the display shows:
FULL , charging is complete.
Fully charge the Network Walkman (to FULL in the remaining battery indication of the
display) before using it for the first time.
2 Place the pointer over [Transfer] and select
[ATRAC Audio Device] from the transfer
destination list.
SonicStage screen
To stop recording, click
.
Importing audio files to
your computer
To import audio files from an audio CD
Record and store audio files from an audio CD to the SonicStage [My Library].
1 Double-click on the desktop.
SonicStage software starts up.
2 Insert the
audio CD that
you want to
record into the
CD drive of
your computer.
3 Place the
pointer over
[Music Source]
and click
[Import a CD].
4 Click to
record the
songs.
To stop recording, click
.
To change the format and bit rate,
click [Settings] before 4.
To import audio files from your computer
1 Double-click on the desktop.
SonicStage software starts up.
2 Place the pointer over [Music Source] and
click [Import Music Files].
3 Click an audio file you want to import.
You can select several audio files simultaneously using the CTRL key.
4 Click [Import].
SonicStage screen
1 Connect headphones to
headphone jack.
2 Press Nx to start
playback.
To stop playback, press Nx again.
3 Press VOL +/– to adjust
the volume.
If playback does not start
Make sure that the Shuttle switch is not set to HOLD.
5 Press REPEAT/SOUND
repeatedly to select the
repeat mode you want.
To obtain CD information automatically, connect your
computer to the Internet.
If CD information does not appear automatically, click [CD
Info] before
4 while connected to the Internet.
3 Select an
audio file(s)
or album
you want to
transfer.
Notes
• The recorded music is limited to private use only. Use of the music beyond this limit requires permission of the
copyright holders.
• Sony is not responsible for incomplete recording/downloading or damaged data due to problems of the
Network Walkman or computer.
• Do not disconnect the USB cable while the data is being transferred. If you do, the data being transferred may
be destroyed.
• When you record an audio CD for the first time, [CD Drive Check] will be performed. Record the audio CD
when it is completed.
• The number of transfers for an audio file may be limited for reasons of copyright.
• If the USB cable is disconnected while the data is being transferred, unnecessary data may be left in the
Network Walkman. In this case, transfer usable audio files (included non-audio data) back to your computer
and format the Network Walkman.
Remaining battery indication
The battery icon in the display changes as shown below.
The battery power gets low as shown in the battery icon. If “LOW BATTERY” is displayed, you cannot play back
with the Network Walkman. In this case, charge the battery by connecting to your computer.
z Tip
You can import audio files using the [Import] of [File] menu in the following 3 ways.
• Scan Folder
• Music File
• M3U File
What is CD information?
CD information is a track name, an artist name and an album name included in an audio file. When
you insert an audio CD into CD drive of your computer, SonicStage will automatically obtain the
CD information from CDDB (Gracenote CD DataBase) via Internet.
You cannot obtain the CD information from CDDB if the CD is not registered at CDDB.
to USB jack to USB jack
Dedicated USB cable
(supplied)
4 Click to
start
transferring.
Playing back a song by
searching
none (Normal play)
(Repeat)
(Single Repeat)
(Shuffle Repeat)
On the search flow and Play Range
Press SEARCH/MENU to display the search menu screen. Proceed to the next stage by
pressing Nx, and return to the previous stage by pressing SEARCH/MENU on the search
menu screen.
The searched songs (
as shown in the illustration below) become a Play Range (coverage of
playback).
Example of searching
Refer to the illustration below.
1 Press SEARCH/MENU to display
the search menu screen.
2 Rotate the Shuttle switch to select
“ Artist” and press
Nx to
confirm.
3 Rotate the Shuttle switch to select
“ Artist1” from the artist list and
press
Nx to confirm.
4 Rotate the Shuttle switch to select
“
Album1” from the album list of
Artist1 and press Nx to confirm.
The track list of Album1 is displayed.
In this case, the track list becomes the Play Range.
Playing back
SEARCH/MENU
Nx
to . to >
Shuttle switch
To search tracks
Use the Shuttle switch on the Network Walkman.
To
Skip to the beginning of the next track
Skip to the beginning of the current track
Go forward/backwards quickly
Shuttle switch operation
Rotate the Shuttle switch to >.
Rotate the Shuttle switch to ..
Rotate the Shuttle switch to . / > and hold it.
* When you select “All Track”, all track lists are displayed and the Play Range will be “All”.
All Track *
Group
Album Artist Track3 Track2 Track1
Track3
Track2 Track1
Track3 Track2 Track1
Track3
Track2 Track1
Track3 Track2 Track1
Track3 Track2 Track1
Track3 Track2
Track1
Artist2 Artist1 All Artist
Album2
Album1 All Album
Album2
Album1 All Album
Group2 Group1 All Group
Search menu screen Artist list
Album list
Group list
Album list of
searched artist
Track list (Play Range)
All tracks (artist order)
All tracks of the selected
artist (album order)
Tracks in the selected album
All tracks (album order)
Tracks in the selected album
All tracks (group order)
Tracks in the selected group
GROUP
Normal
HOLD
5 Rotate the Shuttle switch to select “ Track1” from the track list and
press Nx to confirm.
Playback starts from Track1.
Playback will stop automatically at the end of Track3 (in this case, the end of the Play Range).
You can search for desired tracks to playback by artist name ( Artist), album name ( Album),
or group transferred from your computer using the SonicStage software ( Group).
Listening to FM Radio
1 Press and hold DISP/FM for
half a second.
The FM tuner screen is displayed and FM
signals are received.
2 Selecting broadcast stations.
– Manual Tuning
1 Set the Shuttle switch to the
GROUP (Manual) position.
2 Select the next (or previous)
frequency by rotating the
Shuttle switch to
> (or
. ).
– Preset Tuning
(see “z Tip” below)
1 Set the Shuttle switch to the
center (Preset) position.
2 Select the next (or previous)
preset number by rotating the
Shuttle switch to
> (or
. ).
SEARCH/MENU
REPEAT/SOUND
Nx
to . to >
Shuttle switch
GROUP
(Manual)
Preset
HOLD
SEARCH/MENU
DISP/FM (Display/FM)
Nx
to . to >
Shuttle switch
Q1 Do MP3 audio files allow for use in the Network Walkman?
A1 You can import MP3 audio files to the SonicStage software and transfer MP3 audio files to
the Network Walkman using SonicStage.
MP3 format files to be used:
– MPEG-1 Audio Layer-3
– Sampling frequency: 44.1 kHz
– Bit rate: 32 to 320 kbps, variable bit rate-compliant
Q2 Can the Network Walkman record audio files or FM Radio?
A2 The Network Walkman cannot record audio files or FM Radio. Import the desired audio files
to the SonicStage software and transfer them to the Network Walkman using SonicStage.
Additional Information Q&A
z Tip
In Preset Tuning, you cannot select broadcast stations if no preset stations are entered. Preset receivable broadcast
stations in your area automatically by selecting “FM Auto Preset” in the menu screen. This is convenient when
you use the FM tuner for the first time or when you change to a new area.
1 Press and hold SEARCH/MENU for half a second.
2 Rotate the Shuttle switch to select “FM Auto Preset>”, and press Nx to confirm.
3 Rotate the Shuttle switch to select “OK”, and press Nx to confirm.
For details on Preset Tuning, refer to the PDF file “Operating Instructions”.