Installing a 5¹” internal hard disk drive, Installing a 5¼” internal hard disk drive – Sony PCV-R532DS User Manual
Page 53
Removing, Installing, and Replacing Components
45
Installing a 5¼” Internal Hard Disk Drive
Your system comes with an available 5¼” bay to hold an additional 3½”
or 5¼” hard disk drive. The drive you install can access the front panel.
The hard disk drive access light blinks when either internal drive is
active.
1
Configure the jumpers on the new drive as a secondary slave (see
your drive’s documentation for configuration instructions).
2
Disconnect the power cord from the computer.
3
Remove the cover (see
4
Remove the front panel (see
5
Lay the system on its side (see following diagram).
!
Before opening the system unit, save any open files, exit the Windows
®
operating system, turn off the power of the computer and all attached
peripherals, and then unplug the power cord.
KY0084.VSD
Drive connector
Power connector
Jumpers