Sony HDR-XR200V - Manual (Page 58)

8
Table of C
on
ten
ts
U
seful R
ec
or
ding
Techniques
Inde
x
Acquiring the current
location information
(HDR-XR200V)
You can display the current location on a
map.
Set the GPS switch to ON so that your
camcorder can acquire the current location
information (p. 38).
Touch ( YOUR LOCATION) on the
recording screen.
The current location is displayed and
marked at the center of the LCD screen.
If you touch a certain point on the screen,
the map shows the area with that point at
the center.
Touch (your location) at the bottom
left of the LCD screen to move the current
location back to the center.
To close the map screen
Touch .
Notes
The map always displays the north at the top.
Tips
You can change the scale using the zoom lever
or zoom buttons (W: larger, T: smaller).
Your camcorder acquires the current location
information every 10 seconds. The displays
of the center marker, etc., appear differently
according to the status of the current inquiry.





When your camcorder cannot acquire the
current location information, the center marker
turns gray and the map shows the last location
acquired.
If you hold a certain point, the map keeps
scrolling.
You can also display the current location by
touching (HOME)  (OTHERS) 
[ YOUR LOCATION].


