Sony DSC-S75 - Manual (Page 92)

92
Your personal computer
does not recognize your
camera. • The battery level is low.
t Use the AC power adaptor (page 14).
• The camera is turned off.
t Turn on the camera.
• The USB cable is not connected firmly.
t Disconnect the USB cable, and connect it again
firmly. Make sure that “USB MODE” is
displayed on the LCD screen (pages 33, 35).
• The USB connectors on your personal computer are
connected to other equipment besides the keyboard,
the mouse, and your camera.
t Disconnect the USB cables except for the ones
connected to the keyboard, the mouse, and your
camera.
• The USB driver is not installed.
t Install the USB driver (page 33).
• [USB CONNECT] is set to [PTP] in the setup settings.
t Set it to [NORMAL] (page 81).
• Since the camera is connected to a computer with
the USB cable before installing the USB driver, the
drive is not recognized by the computer.
t Delete the drive which is not recognized, then
install the USB driver. For details, see the
procedure on page 93.
No function works though
the power is on.
t Remove the battery pack, then install it again
after about one minute. If the function still do
not work, press the reset button located on the
bottom using a sharp-pointed object. (If you
press the reset button, the date and time setting
is cleared.)
Symptom Cause and/or Solution