Adaptec SBC-599 - Manual (Page 70)

60 SBC-596/599 User's Manual
A log of the information output during the install can be found in
<root>:\OS2\INSTALL\DISPLAY.LOG
4. After restarting the system, perform the following steps:
1). Open the OS/2 System folder.
2). Open the System Setup folder.
3). Open the Display Driver Install Object
This step will execute the Display Driver Installation
(DSPINSTL) utility program to finish installation of the new
drivers.
4). When the Display Driver Install window appears, select
Primary Display and then select OK.
5). When The Primary Display Driver List window appears,
select “Chips and Technologies 65550/554” from the list
of adapter types, then select OK to install the video
driver.
6). When the installation is complete, you will need to
shutdown and then restart the system for the changes to
take effect. Make sure to remove the install diskette
before restarting the system.
When the system has restarted, the display driver will be
initialized for 640x480x256 Color, 60Hz refresh. To switch to a
different video resolution, color depth, or refresh rate, follow
the steps below.