Sony NV-U83T - Manual (Page 27)

27
Traffic Information settings
The following traffic information settings are
configurable.
In the menu display, touch c “Traffic
Information” c the desired item c the desired
option.
* Applicable only when “Traffic Information” is set to
“Use” in the route profile setting (page 26).
Phone settings (NV-U83T only)
The following phone settings are configurable.
In the menu display, touch c “Phone” c
the desired item c the desired option.
*1 The name of “Home” cannot be changed.
*2 Available only if data exists in the phone book.
Automatic Zoom
To change the map scale automatically
depending on the driving speed. The faster the
speed, the larger the map scale: “ON,” “OFF.”
Intersection Zoom
To show the magnified view of an intersection:
“ON,” “OFF.”
Select Voice
To select the guidance voice type.
For details on how to import guidance voice data
from your computer, see “Guidance voice data
management” on page 29.
To show the data on the unit/“Memory Stick
Duo,” select “Unit”/“Memory Stick.”
To register and activate the imported item, select
the item
c “Activate.”
To select the desired item, select the item c
“Done” c “OK.”
To delete the item, select the item to delete c
“Delete” c “OK.”
Status Information
To check the name, frequency, and reception
level of the current TMC station.
Recalculate Route*
To calculate an alternative route automatically to
avoid a new traffic event when detected on the
current route: “ON,” “OFF.”
Indication in the Map
To show the following indications on the map:
“ON,” “OFF.”
– “Traffic Control Point”
– “Traffic Control Section”
Activate TMC Service
To activate the Pay-TMC-Services.
Select “Activate,” then enter the activation code.
My Devices (page 20)
To select the cellphone to connect for a hands-
free call or phone book import; delete the
registration of the cellphone.
To delete the registration, select “Delete” c the
cellphone(s) to delete c “Done” c “OK.”
Add Devices (page 20)
To pair the unit and the cellphone.
Bluetooth Signal (page 20)
To activate the Bluetooth signal: “ON,” “OFF.”
Bluetooth Device Info
To view the information of this unit, such as the
name, address, or compatible profile; edit the
device name.
To edit the device name, select “Edit,” then enter
the new name.
Receive Phone Book (page 23)
To import the phone book data of the cellphone
to this unit.
Volume (Ring Tone)
To preset the ring tone volume.
Speed Dial
To preset/edit phone numbers on “D1”/“D2”/
“D3”/“Home.”
– “New Input”: Registers the phone number and
the name.* 1
– “Edit”: Changes the phone number and/or the
name.* 1
– “Copy from Phone Book”: Registers the phone
number copied from the phone book.* 2
– “Clear”: Deletes the registration of the selected
preset.
Noise / Echo Cancellation
To reduce echo and noise in phone call
conversations.
Select “Mode 1” normally.
Select “Mode 2” or “OFF” if the sound quality is
unsatisfactory.